Part Code 0190 - HP StorageWorks P9000 - Disk Arrays Manual

Table 1 1 Error codes (part code 01 10) (continued)
Part Error
Code Number
01 10 5701 1
01 10 59002
01 10 59003
01 10 59105
01 10 65092
01 10 67005
01 10 69007
01 10 69028

Part code 0190

Table 12 Error codes (part code 0190)
Part Error
Code Number
0190 6017
Error Message
An error occurred regarding screen
display. Please log off from Remote Web
Console. After that, please log on to
Remote Web Console again and check
whether configuration changes have
been made correctly.
The storage system is in internal process,
or some other user is changing the
configuration. Wait, then click [OK] and
change the mode to Modify. Do you
want to change the mode to Modify
again?
Succeeded to change the mode to
Modify.
Do you want to refresh all the
configuration information?
An error occurred regarding screen
display. Select the window you want to
display from the [Go] menu.
Configuration information on the storage
system and the configuration information
on the SVP became inconsistent. Click
[Refresh All] on the File menu and refresh
the configuration information.
Another user is accessing in Modify
mode. Please wait for a while, then retry
the operation.
The setting may not be applied when
another user is applying the setting.
When the setting is not applied, wait a
while and retry the operation. Do you
want to continue?
Error Message
The user account list was modified by
the administrator while you were making
settings.
Recommended Action
Log off from Remote Web Console. Then
log on to Remote Web Console again
and check whether configuration
changes have been made correctly.
If configuration changes have been
made correctly, there is no problem.
If configuration changes have been
made incorrectly, retry the operation.
Wait for a while, then click [OK] and
change the mode to Modify.
Reply to the message.
To refresh all the configuration
information, click [OK]. Otherwise, click
[Cancel].
Reply to the message.
Click [Refresh All] on the File menu and
refresh the configuration information.
Another user is accessing the system in
Modify mode. Wait for a while, then
retry the operation.
To continue processing, click [OK]. To
stop processing, click [Cancel].
Recommended Action
Reboot the process.
Severity
Level
E
W
i
i
W
E
W
i
Severity
Level
-
Part code 0190 25