HP StorageWorks P9000 - Disk Arrays Manual page 102

Table 38 Error codes (part code 3305) (continued)
Part Error
Code Number
3305 1 142
3305 1 144
3305 1601
3305 1602
3305 1900
3305 1910
3305 191 1
3305 1913
3305 1914
3305 2004
3305 2005
3305 201 1
3305 2015
3305 2022
3305 2081
3305 2085
3305 2086
3305 2087
3305 2088
102 Message (part code group 3nnn)
Error Message
The specified volume is used as a volume
of Volume Security for Mainframe.
The specified volume is used as a LUSE
volume.
Error happened before the change was
processed. This functionality is not
available. Open Volume Management
is required.
This functionality is not available. Virtual
LVI is required.
Maintenance operation is executed by
the SVP.
The specified volume contains Snapshot
pairs.
The specified volume contains Pool-VOLs.
The setting cannot be made because the
specified LDEV is a remote command
device.
The number of V-VOL(s) has exceeded
the maximum number of V-VOL(s) that
can be set in a disk subsystem.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The status of the disk subsystem requires
maintenance (for example, the subsystem
is blocked, the shared memory is
inconsistent, or some other factor).
An error occurred while connecting to
the subsystem. Please wait for a while,
and then retry the operation.
An error occurred during SVP
processing.
An error occurred during a VLL operation
to add or delete customized volumes.
Please wait for a while, and then retry
the operation.
Copying is in progress for Remote Copy,
Business Copy, Business Copy Z,
Snapshot, or Auto LUN pairs.
The configuration of Remote Copy,
Business Copy, Business Copy Z, Auto
LUN, or Snapshot has been defined.
The system is online to the mainframe
host.
The Remote Copy pair is suspended.
Recommended Action
Check the setting of the specified volume.
Check the setting of the specified volume.
Install the necessary P.P. license key.
Install the necessary program product.
Wait for the maintenance to complete,
then retry the operation.
Check the setting of the specified volume.
Select another volume.
Check the setting.
Correct the settings, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
A communication error occurs. If the
same error occurs despite retrying,
please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
To perform a VLL operation on an
external volume, check the status of the
path to the external volume.
Wait a while, then retry the operation.
Release the configuration definition, then
retry the operation.
Take the storage system offline from the
host.
Add an alternative path.
Severity
Level
W
W
W
W
W
W
W
W
W
E
E
E
E
E
E
W
W
W
W