HP StorageWorks P9000 - Disk Arrays Manual page 164

Table 52 Error codes (part code 6010) (continued)
Part Error
Code Number
6010 65770
6010 65771
6010 65772
6010 65773
6010 65774
6010 69018
6010 69022
6010 69023
6010 69033
6010 69034
6010 69035
6010 69036
6010 69037
164 Message (part code group 6nnn)
Error Message
There are no RCUs available. Register
some RCUs of CU Free, then retry the
operation.
There are no external volumes that can
be used as a quorum disk. Create some
external volumes, then retry the
operation.
An external volume is assigned to two
or more quorum disk IDs. An external
volume cannot be used for multiple
quorum disk IDs.
The serial number and the controller ID
of the RCU registered in a quorum disk
do not correspond with the specified
RCU.
The serial number and the controller ID
of the RCU registered in a quorum disk
do not correspond with the information
of RCU used by the specified pair.
There are two or more LDKC numbers
for the specified data volume. In this
operation, please specify only one LDKC
number.
There are no RCUs available. Register
RCUs in the CU or RCUs of CU Free,
then retry the operation.
There are no RUCs available.
To create pairs that have different CU
numbers coexisting in the pair, register
RCU of CU Free and retry the operation.
To create pairs with RCU in the CU,
select the M-VOLs so that different CU
numbers do not coexist in the M-VOLs,
and retry the operation.
Since the number of preview data
exceeded the maximum, the excess data
were discarded. No more preview data
can be stored.
The number of preview data exceeds the
maximum.
No more preview data can be stored.
Different CU numbers coexist in the
selected M-VOLs. Select M-VOLs so that
different CU numbers do not coexist in
the M-VOLs, and retry the operation.
The file name should be from 1 to 32
characters.
More than 256 script files cannot be
transferred to the SVP.
Recommended Action
Register some RCUs of CU Free, then
retry the operation.
Create some external volumes, then retry
the operation.
Assign another external volume not used
in the quorum disk IDs, then retry the
operation.
Select a RCU and a quorum disk ID that
have the same serial number and the
controller ID, then retry the operation.
Select the quorum disk ID corresponding
with the serial number and the controller
ID of the RCU that which is used by the
specified pair, then retry the operation.
Check the LDKC number for the specified
data volume, and specify only one LDKC
number.
Register RCUs in the CU or RCUs of CU
Free, then retry the operation.
To create pairs that have different CU
numbers coexisting in the pair, register
RCU of CU Free and retry the operation.
To crate pairs with RCU in the CU, select
the M-VOLs so that different CU numbers
do not coexist in the M-VOLs, and retry
the operation.
Click [OK]. Apply the Preview data to
the disk storage system, then retry the
operation.
Click [OK]. Apply the Preview data to
the disk storage system, then retry the
operation.
Select M-VOLs so that different CU
numbers do not coexist in the M-VOLs,
and retry the operation.
Change the number of characters used
for the file name to less than 32, then
retry operation.
Delete the unnecessary script files, then
retry the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W