HP StorageWorks P9000 - Disk Arrays Manual page 59

Table 25 Error codes (part code 1005) (continued)
Part Error Error Message
Code Number
1005 5010 An error occurred during SVP
processing.
1005 5013 An error occurred during SVP
processing.
1005 5099 An error occurred during SVP
processing.
1005 6000 An error occurred during SVP
processing.
1005 6012 An error occurred during SVP
processing.
1005 6036 An error occurred during SVP
processing.
1005 6040 An error occurred during SVP
processing.
1005 6050 An error occurred during SVP
processing.
1005 7060 An error occurred during SVP
processing.
1005 8001 An error occurred while connecting to
the subsystem.
1005 8100 An error occurred while connecting to
the subsystem.
1005 8102 This function is not supported.
1005 55206 The configuration information being set
does not match the current configuration
information.
1005 55500 An error occurred during SVP
processing.
1005 55553 The specified port is not a fibre port.
1005 55554 The specified WWN is not registered.
1005 55555 The value of the WWN is not specified
or is set to zero.
1005 55561 An error occurred during SVP
processing.
1005 55566 An error occurred during SVP
processing.
1005 55569 The specified Group-ID is already
registered.
1005 55571 The target cannot be set because the
number of targets exceeds the maximum
that can be set in a port.
1005 55574 The setting of the specified port cannot
be changed because the attribute of the
specified port is Initiator or External.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
Check the settings(s), then retry the
operation.
If this problem persists, please contact
HP Technical Support.
Check the setting.
Check the setting.
Check the setting.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check the setting.
Check the setting.
Check the setting.
Severity
Level
E
E
E
E
E
E
E
E
E
E
E
E
E
E
W
W
W
E
E
W
W
W
Part code 1005 59