HP StorageWorks P9000 - Disk Arrays Manual page 86

Table 31 Error codes (part code 3005) (continued)
Part Error
Code Number
3005 78010
3005 7801 1
3005 78012
3005 78013
3005 78014
3005 78015
3005 78016
3005 78017
3005 78018
3005 78019
3005 78020
3005 78024
3005 78025
3005 78026
3005 78027
3005 78028
86 Message (part code group 3nnn)
Error Message
The specified operation cannot be
executed, because the maximum
reserved pool capacity is incorrect.
The specified operation cannot be
executed, because the pool status is
invalid.
The specified operation cannot be
executed, because the threshold of the
pool exceeds the maximum.
The specified operation cannot be
executed, because it exceeds the
maximum reserved pool capacity.
The operation cannot be executed,
because the specified logical volume is
a quorum disk.
The operation cannot be executed,
because RAID levels of the specified
logical volumes do not match.
The operation cannot be executed,
because a blocked pool volume exists
in the pool to which the specified
logical volume is to be added.
The operation cannot be executed,
because the specified logical volume is
the top pool volume.
The operation cannot be executed,
because the number of tiers of the
specified logical volume is incorrect.
The operation cannot be executed,
because the specified logical volume is
not a Smart Tiers volume.
The operation cannot be executed,
because the available period to stop
shrinking pools has elapsed.
The encryption key cannot be created,
because an already created encryption
key number is included in the specified
encryption key number.
The encryption key cannot be deleted,
because an uncreated encryption key
number is included in the specified
encryption key number.
The encryption key cannot be deleted,
because an encryption key in-use exists
in the specified encryption key number.
The frequency distribution data cannot
be obtained because it is not complete.
The frequency distribution data cannot
be obtained. There is no monitoring
information (Invalid monitoring).
Recommended Action
Check the maximum reserved pool
capacity, then retry the operation.
Check the pool status.
Check the threshold of the pool, then
retry the operation.
Check the maximum reserved pool
capacity, then retry the operation.
Check the specified logical volume, then
retry the operation.
Check the specified logical volumes, then
retry the operation.
Release the blocked status of the pool
volume in the pool, then retry the
operation.
Check the specified logical volume, then
retry the operation.
Check the specified logical volume, then
retry the operation.
Check the specified logical volume, then
retry the operation.
You cannot stop shrinking pools. Wait
until pools are shrunk.
Check the specified encryption key
number.
Check the specified encryption key
number.
Check the specified encryption key
number.
Wait for a while, then retry the
operation.
Collect the information, then retry the
operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W