HP StorageWorks P9000 - Disk Arrays Manual page 47

Table 21 Error codes (part code 0605) (continued)
Part Error Error Message
Code Number
0605 66722 CacheMode is invalid.
0605 66724 InflowControl is invalid.
0605 66736 It is not set within the range where LDKC
can be used.
0605 66739 It is not set within the range where CU
can be used.
0605 66742 It is not set within the range where LDEV
can be used.
0605 66744 It is not set within the range where LDEV
capacity can be used.
0605 66748 A value different from SSID that has
already been set is specified.
0605 66749 The number of paths has reached the
maximum number.
0605 66750 The specified WWN is not registered.
0605 66751 The specified WWN has already been
specified.
0605 66752 The specified external volume is a
volume of the storage system that cannot
be used as an external storage.
0605 66747 The value of SSID is not set within the
available range.
0605 66798 Specified WWN was not found.
0605 66799 Specified external volume was not found.
0605 68730 The Snapshot Pool-VOL is included in the
items.
0605 68733 The volumes registered in a Thin
Provisioning Pool are included in the
items to be maintained.
0605 68735 A volume used as system disk is included
in the items to be maintained.
0605 68741 The Disconnect External Storage Systems
or the Disconnect External Volumes
cannot be executed for an external
volume that includes Pool VOLs
registered in the pool that has the
association with a normal Thin
Provisioning volume.
0605 68742 Set the same cache mode to all the
volumes that compose a Pool VOL.
0605 68800 Volume migration or Quick Restore is in
progress.
Recommended Action
Check the setting of CacheMode.
Check the setting of InflowControl.
Check the setting of LDKC.
Check the setting of CU.
Check the setting of LDEV.
Check the setting of LDEV capacity.
Check the setting of SSID.
Check the setting of path.
Check the specified WWN.
Excluding the overlapping setting, then
retry the operation.
Check the type of the storage system.
Check the setting of SSID.
Check the specified WWN.
Check the specified external volume.
Delete all the pairs and the Pools that
belong to Snapshot Pool-VOL, then retry
the operation.
Delete the Thin Provisioning Pool in
which the volume included in the items
to be maintained is registered, then retry
the operation.
Restore the blocked status of the system
disk. If the status cannot be restored,
please contact HP Technical Support.
Change the status of the associated Thin
Provisioning volume to blocked, then
retry the operation.
If there is a volume whose cache mode
cannot be changed due to its bind mode
setting, release the bind mode setting
first.
Wait for the migrating volume or the
Quick Restore to be completed, then retry
the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 0605 47