HP StorageWorks P9000 - Disk Arrays Manual page 193

Table 53 Error codes (part code 6505) (continued)
Part Error Error Message
Code Number
6505 58704 The operation to change the status to the
status ready for Delta resync failed
because the status of the volumes was
one of the following:
The P-VOL for Continuous Access
Synchronous and the primary data
volume for Continuous Access Journal
are different.
The M-VOL for Continuous Access
Synchronous Z and the primary data
volume for Continuous Access Journal
Z are different.
6505 58705 The Delta resync operation failed. The
specified secondary data volume should
meet the following requirements.
The specified volume is a secondary
data volume of another mirror.
The pair status of the specified volume
is PSUS, PSUE, Suspend, PAIR or
Duplex.
6505 58707 The Add Pair (Paircreate) operation or
the Resume Pair (Pairresync) operation
failed because the status of the specified
secondary data volume was Not Ready.
6505 58708 The Add Pair (Paircreate) operation to
get ready for Delta resync failed, or the
recovery to the status ready for Delta
resync failed. If the same problem
persists despite retrying, please contact
HP Technical Support.
6505 58716 The licensed capacity of Continuous
Access Synchronous or Continuous
Access Synchronous Z on the RCU is
insufficient.
Check the licensed capacity of this
program product and the related
program products.
The related program products are:
Continuous Access Synchronous or
Continuous Access Synchronous Z
Continuous Access Journal or
Continuous Access Journal Z
6505 58717 The licensed capacity of Continuous
Access XP Async or TrueCopy Async
z/OS(R) on the RCU is insufficient.
Check the licensed capacity of this
program product and the related
program products. The related program
products are:
Continuous Access XP or TrueCopy
z/OS
Continuous Access XP Async or
TrueCopy Async z/OS
Recommended Action
Check the status of the data volumes in
the Continuous Access Synchronous,
Continuous Access Synchronous Z,
Continuous Access Journal or the
Continuous Access Journal Z window.
Check the status of the specified
secondary data volume.
Check the status of the specified
secondary data volume.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the licensed capacity of this
program product and the related
program products.
See the user's guides of Continuous
Access Synchronous or Continuous
Access Synchronous Z for details of the
licensed capacities.
The related program products are:
Continuous Access Synchronous or
Continuous Access Synchronous Z
Continuous Access Journal or
Continuous Access Journal Z
Check the licensed capacity of this
program product and the related
program products. See the user's guides
for the RCU side of Continuous Access
XP or TrueCopy z/OS(R) for details of
the licensed capacities. The related
program products are:
Continuous Access XP or TrueCopy
z/OS
Continuous Access Async XP or
TrueCopy Async z/OS
Severity
Level
W
W
W
W
W
W
Part code 6505 193