HP StorageWorks P9000 - Disk Arrays Manual page 237

Table 59 Error codes (part code 7005) (continued)
Part Error Error Message
Code Number
7005 68867 The command has been rejected,
because the volume specified as P-VOL
is a quorum disk.
7005 68868 The command has been rejected,
because the volume specified as S-VOL
is a quorum disk.
7005 68869 The command has been rejected,
because the volume specified as the
reserved volume is a quorum disk.
7005 68922 The specified P-VOL is a volume of using
two mirrors, which are included in 3DC
cascade, 3DC multi target, or Delta
resync configuration. The operation for
this P-VOL failed due to one of the
following reasons.
The specified volume was used by
Delta resync of Continuous Access
Journal.
The specified volume was used by a
data volume of Continuous Access
Journal.
7005 68923 The specified S-VOL is a volume of using
two mirrors, which are included in 3DC
cascade, 3DC multi target, or Delta
resync configuration. The operation for
this S-VOL failed due to one of the
following reasons.
The specified volume was used by
Delta resync of Continuous Access
Journal.
The specified volume was used by a
data volume of Continuous Access
Journal.
7005 68924 The specified volume is a volume of
using two mirrors, which are included in
3DC cascade, 3DC multi target, or Delta
resync configuration. The operation for
this volume failed due to one of the
following reasons.
The specified volume was used by
Delta resync of Continuous Access
Journal.
The specified volume was used by a
data volume of Continuous Access
Journal.
7005 75002 The command was rejected, because the
Thin Provisioning volume specified as
P-VOL was not associated with a pool.
7005 75003 The command was rejected, because the
Thin Provisioning volume specified as
S-VOL was not associated with a pool.
Recommended Action
Specify another volume.
Specify another volume.
Specify another volume.
The operation cannot be executed in the
current status of Continuous Access
Journal pair. See the section about the
interoperability with other products and
functions described in the Business Copy
User Guide for the relation between the
state of Continuous Access Journal pair
and the Business Copy operations.
The operation cannot be executed in the
current status of Continuous Access
Journal pair. See the section about the
interoperability with other products and
functions described in the Business Copy
User Guide for the relation between the
state of Continuous Access Journal pair
and the Business Copy operations.
Specify another volume.
Associate the specified Thin Provisioning
volume with a pool, then retry the
operation.
Associate the specified Thin Provisioning
volume with a pool, then retry the
operation.
Severity
Level
W
W
W
W
W
W
W
W
Part code 7005 237