HP StorageWorks P9000 - Disk Arrays Manual page 99

Table 36 Error codes (part code 3205) (continued)
Part Error Error Message
Code Number
3205 66504 Specified LDKC:CU:LDEV has already
been used.
3205 66505 The specified LDEV number has already
been assigned to another emulation
group within the range grouped by 32
LDEV numbers.
3205 66506 Specified SSID has already been used.
3205 66508 The specified LDEV capacity is invalid.
3205 66510 The specified emulation type cannot be
used.
3205 66512 Specified CLPR is not mounted.
3205 66520 Mainframe volume and intermediate
volume cannot be set because the
package for mainframe system is not
mounted.
3205 66747 The value of SSID is not set within the
available range.
3205 66748 A value different from SSID that has
already been set is specified.
3205 68725 The shared memory for the V-VOL
management area is insufficient.
3205 68726 The capacity of Thin Provisioning volume
(V-VOL) is invalid.
3205 68728 The pool is in an abnormal state.
3205 68735 A volume used as system disk is included
in the items to be maintained.
3205 68748 The number of Thin Provisioning volumes
that can be made in a single pool has
exceeded the maximum.
3205 68751 The storage system is in process to delete
V-VOL.
3205 68800 Volume migration or Quick Restore is in
progress.
3205 68802 The volume to be maintained includes
the system disk being used at Audit Log.
3205 68897 There is a pool that has been blocked.
And the item to be operated includes a
Thin Provisioning volume (V-VOL).
Recommended Action
Check the setting of LDKC, CU, and
LDEV.
Check the setting of emulation groups
within the range grouped by 32LDEV
numbers.
Check the setting of SSID.
Check the setting of LDEV capacity.
Check the setting of emulation type.
Check the setting of CLPR.
Check the mounted packages.
Check the setting of SSID.
Check the setting of SSID.
Delete unnecessary Thin Provisioning
Pools (THP) and Thin Provisioning
volumes (V-VOL), then retry the
operation. If this problem persists, please
contact HP Technical Support.
Check the capacity of Thin Provisioning
volume (V-VOL).
Recover the pool, then retry the
operation.
Restore the blocked status of the system
disk. If the status cannot be restored,
please contact HP Technical Support.
Check the configuration of the current
V-VOL.
Wait for a while, then retry the
operation.
Wait for the migrating volume or Quick
Restore to be completed, and then retry
the operation.
Set the Audit Log buffer function to
"Disable," then retry the operation.
Restore the pool that has been blocked
by the Thin Provisioning function, then
retry the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 3205 99