Part Code 3305 - HP StorageWorks P9000 - Disk Arrays Manual

Part code 3305

Table 38 Error codes (part code 3305)
Part Error
Code Number
3305 1035
3305 1036
3305 1037
3305 1038
3305 1039
3305 1041
3305 1043
3305 1044
3305 1045
3305 1049
3305 1074
3305 1075
3305 1 101
3305 1 103
3305 1 104
3305 1 105
3305 1 1 13
Error Message
The SSIDs are not defined.
The size of the specified volume is
outside the setting range.
The free space remaining in the parity
group is not enough to install a
customized volume (CV).
The specified emulation type of the
customized volume (CV) is a type that
cannot be combined.
A path is defined to the specified
volume.
The CU number and the LDEV number
set in the VLL operation are the same as
those of other volumes.
An operation is specified for the
uninstalled VDEV.
An error occurred during SVP
processing.
The specified Subsystem ID already
exists. Specify another SSID.
An error occurred during SVP
processing.
The specified CU number cannot be set.
In the VLL operation (Create LDEVs,
Delete LDEVs), there are some operations
which cannot be set together are
specified.
An operation is specified for the
uninstalled volume.
An operation is specified for the
uninstalled Parity Group.
Subsystem ID cannot be set alone.
The number of volumes exceeds the
maximum that can be set.
The specified volume is currently used
by Parallel Access Volumes and is not
available for VLL operation.
Recommended Action
If this problem persists, please contact
HP Technical Support.
The size of volume that can be set differs
by the type of emulation.
Check the setting range of each
emulation type, then change the size of
volume.
The error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
The error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
Check the setting.
Check and correct the settings.
Correct the settings, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
Correct the specified content, and issue
the request again.
If this problem persists, please contact
HP Technical Support.
Correct the settings.
Specify one or more than one operations
of Create LDEVs, Delete LDEVs in the VLL
operation.
Correct the settings, then retry the
operation.
Correct the settings, then retry the
operation.
Request the change of the Subsystem ID
along with the VLL operation.
Check the settings.
Change the volumes ID to specify, or
release the Parallel Access Volumes
setting.
Severity
Level
E
W
E
E
W
W
W
E
W
E
W
E
W
W
W
W
W
Part code 3305 101