HP StorageWorks P9000 - Disk Arrays Manual page 180

Table 53 Error codes (part code 6505) (continued)
Part Error
Code Number
6505 58286
6505 58287
6505 58288
6505 58289
6505 58290
6505 58291
6505 58292
6505 58293
6505 58294
6505 58295
6505 58296
6505 58297
180 Message (part code group 6nnn)
Error Message
The command was rejected because the
command was issued to the primary data
volume. The command is supposed to be
issued to the secondary data volume.
The command was rejected because the
command was issued to the secondary
data volume. The command is supposed
to be issued to the primary data volume.
The specified primary data volume is
already paired with another volume.
The specified secondary data volume is
already paired with another volume.
The specified primary data volume is not
paired with any another volume.
The specified secondary data volume is
not paired with any another volume.
The specified journal volume is unusable.
The specified operation cannot be
performed on the data volume pair.
The specified operation cannot be
performed because the status of the data
volume pair is changing.
An internal error occurred.
The specified volume is used by another
program product.
The specified primary data volume is
being used by another program product.
Recommended Action
Check the command parameters.
Check the command parameters.
Check the status of the specified primary
data volume.
Check the status of the specified
secondary data volume.
Check the status of the specified primary
data volume.
Check the status of the specified
secondary data volume.
Check whether the journal volume is in
any of the following conditions:
Data in the journal volume is being
copied; correction copy or drive copy
is in progress.
The journal volume is in correction
access condition.
The journal volume is blocked.
The journal volume is being
maintained.
The access attribute of the journal
volume is Read Only.
Check the status of the specified pair.
Check the status of the specified pair.
Please contact HP Technical Support.
Check if the specified volume is used by
any of the following program products:
Auto LUN
Business Copy/Snapshot
Compatible FlashCopy
Thin Provisioning
Business Copy Z
Check if the specified primary data
volume is being used by any of the
following program products:
Business Copy Z
Continuous Access Synchronous Z
Auto LUN
Severity
Level
W
W
W
W
W
W
W
W
W
E
W
W