HP StorageWorks P9000 - Disk Arrays Manual page 92

Table 33 Error codes (part code 03022) (continued)
Part Error
Code Number
03022 105189
03022 105191
03022 105192
03022 105193
03022 105194
03022 105195
03022 105205
03022 105231
03022 105232
03022 105233
03022 105248
03022 105249
03022 105250
03022 105259
03022 105263
03022 105267
03022 105270
03022 105271
03022 105272
03022 105273
92 Message (part code group 3nnn)
Error Message
An LDEV cannot be added because the
free space in the selected pool is
insufficient.
LDEV that has already been set has been
selected.
LDEV not set has been selected.
The number of data patterns exceeds the
setting range.
An error occurred while formatting.
An error occurred while preparing the
quick format.
Any further, the Pool that selects it cannot
set the volume.
An error occurred in the shredding
processing.
The same SSID is specified.
The specified number of digits for SSID
is incorrect.
The processing cannot continue due to
an internal logical contradiction.
Insufficient free space to create LDEV.
Two or more Basic exists together to
External.
There is no output file.
An LDEV that Snapshot is set has been
selected.
Volumes that can be shredded in the
selected volumes will be displayed.
The selected status will be canceled
because the number of free spaces that
exist in the selected parity group exceeds
the number that can be set.
The number of free spaces that exist in
the selected parity group exceeds the
number of volumes that can be set.
Data Output cannot be set more than 3.
The interruption process cannot be done
because there is an unexecuted specified
task.
Recommended Action
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Execute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Execute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the setting(s).
Execute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Specify another unused SSID number.
Enter the SSID number with 4 digits.
Execute refresh.
Check the setting(s).
Check the setting(s).
Please operate it again after executing
Shredding.
Check the setting(s).
Click [OK] to shred.
Select the free spaces again from the
Select Free Space window.
Select the free spaces again from the
Select Free Space window.
Check the setting(s).
Wait for a while, then retry the
operation.
Severity
Level
W
E
E
E
E
E
E
E
E
E
E
W
E
E
I
i
W
W
W
i