HP StorageWorks P9000 - Disk Arrays Manual page 251

Table 62 Error codes (part code 7105) (continued)
Part Error Error Message
Code Number
7105 58004 The command has been rejected
because the issued request is an
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
7105 58259 The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Remote Copy pair.
7105 58260 The command has been rejected,
because the specified S-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
7105 58261 The command has been rejected,
because the specified S-VOL is used as
R-VOL of Continuous Access Synchronous
Z pair.
7105 58262 A pair cannot be created because
shared memory for differential tables is
insufficient.
7105 58299 The operation failed because the
specified S-VOL was a data volume of
Continuous Access Journal Z. Check the
requirements for using the volume with
Continuous Access Journal Z.
7105 58300 The operation failed, because the
specified T-VOL was a data volume of
Continuous Access Journal Z.
7105 58301 The reserve volume setting failed
because the specified volume was a data
volume of Continuous Access Journal Z.
7105 58351 The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Continuous Access Journal Z
pair.
7105 58356 The command was rejected, because the
specified volume was used by
Continuous Access Journal Z and
Continuous Access Synchronous Z.
7105 58451 The disk subsystem is in internal process.
Please retry the operation.
Recommended Action
The requested operation cannot be
performed. Check the status of the
specified volume.
Delete the Remote Copy pair or execute
the operation by other pairs.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the Business Copy for
Mainframe Systems User Guide for the
relation between the state of Continuous
Access Synchronous Z pair and the
Business Copy Z operations.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the Business Copy for
Mainframe Systems User Guide for the
relation between the state of Continuous
Access Synchronous Z pair and the
Business Copy Z operations.
Please add sufficient shared memory to
create a pair.
Check the requirements for using the
volume with Continuous Access Journal
Z.
Release the Continuous Access Journal
Z setting or specify another volume.
Release the Continuous Access Journal
Z setting or specify another volume.
Delete the Continuous Access Journal Z
pair or execute the operation by other
pairs.
To continue the operation, release the
Continuous Access Journal Z pair or the
Continuous Access Synchronous Z pair,
and retry the operation.
If the problem persists despite retrying,
please contact HP Technical Support.
Severity
Level
W
W
W
W
E
W
W
W
i
i
W
Part code 7105 251