HP StorageWorks P9000 - Disk Arrays Manual page 283

Table 80 Error codes (part code 9105) (continued)
Part Error Error Message
Code Number
9105 5819 The specified port is not supported by
this function.
9105 5820 When the host group has a host to which
ports are set, the hosts in this host group
cannot be registered in another host
group.
9105 6012 An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
9105 6023 The file operation failed.
9105 7060 An error occurred during SVP
processing. If this problem persists please
contact HP Technical Support.
9105 71 1 1 An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
9105 7310 Unregistered error code.
9105 8001 A communication time-out error occurred.
9105 8002 Communication is busy. Please retry
later.
9105 8102 The SVP version and the DKC version do
not match.
9105 81 10 The configuration could not be changed.
9105 8659 No PCBs are installed for mainframe
computers.
9105 55548 The specified LDEV is a journal volume,
and therefore cannot be registered in
LDEV groups.
9105 56524 This function cannot be used by the
storage partition administrator.
9105 67000 The LDKC Number is incorrect.
9105 67001 There are no LDKCs mounted.
9105 67002 The specified security group name has
already been used by another LDKC.
9105 67003 The specified host group name has
already been used by another LDKC.
9105 67004 The specified LDEV Group name has
already been used by another LDKC.
Recommended Action
Specify a port supported by this function.
Check the specified host and port.
An error occurred during the SVP
processing. If this problem persists,
please contact HP Technical Support.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Retry the operation. If you get the same
message again, reboot the PC. If
necessary, please contact HP Technical
Support.
Wait a moment and retry.
Please contact HP Technical Support.
Please contact HP Technical Support.
Install PCBs for mainframe computers,
then retry the operation.
Please release the journal volume setting,
or delete the target volume from the LDEV
group.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
There are no volumes mounted. Install
additional volumes to execute the
operation.
Specify another security group name.
Specify another host group name.
Specify other LDEV group name.
Severity
Level
W
W
E
E
E
E
E
E
W
E
E
E
W
E
E
W
E
E
E
Part code 9105 283