HP StorageWorks P9000 - Disk Arrays Manual page 124

Table 46 Error codes (part code 5205) (continued)
Part Error
Code Number
5205 8971
5205 55059
5205 55060
5205 55201
5205 55207
5205 55223
5205 55224
5205 55225
5205 55226
5205 55227
5205 55257
5205 55258
5205 55259
5205 55431
5205 55432
124 Message (part code group 5nnn)
Error Message
An error occurred during SVP
processing.
The specified volumes cannot be used
for migration, because the specified
source volume is a Continuous Access
Synchronous volume or a Continuous
Access Synchronous Z volume, and the
specified target volume is an external
volume.
The specified Auto LUN plan cannot be
executed because a volume on which
VMA of Data Retention is set is paired
with a volume on which VMA is not set.
If the migration source volume is a
normal volume, a CVS volume of the
same capacity as the migration source
volume cannot be specified as the
migration target volume. If the migration
source volume is a CVS volume, a
normal volume of the same capacity as
the migration source volume cannot be
specified as the migration target volume.
The auto migration plans cannot be
created because "None" is specified in
"Sampling Term."
The owner ID of the disk subsystem used
by the user does not match the owner ID
of the specified target volume.
The owner ID of the disk subsystem used
by the user does not match the owner ID
of the specified reserve volume.
The specified plan is the one created by
other than Remote Web Console.
The specified plan is the one created by
other than Remote Web Console.
The specified volume is already reserved
with a different owner ID by Auto LUN.
The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
The volume(s) are already being used as
a data volume by Continuous Access
Journal or Continuous Access Journal Z.
The volume(s) are already being used
by Compatible FlashCopy.
The volume(s) are already being used
by Compatible FlashCopy.
Recommended Action
If this problem persists, please contact
HP Technical Support.
Specify the other volumes.
Confirm the settings of the specified
volumes.
Check the setting of the migration source
volume and the migration target volume.
Specify the parameters other than
"None" in "Sampling Term."
Select a volume that has the same owner
ID.
Select a volume that has the same owner
ID.
The specified plan cannot be released
with Remote Web Console.
The specified migration plan cannot be
stopped with Remote Web Console.
Select a volume that has the same owner
ID.
Confirm the setting of the specified
volume.
Confirm the setting of the specified
volume.
Confirm the setting of the specified
volume.
Confirm the setting of the specified
volume.
Confirm the setting of the specified
volume.
Severity
Level
E
W
W
W
W
W
W
W
W
W
W
W
W
W
W