HP StorageWorks P9000 - Disk Arrays Manual page 216

Table 56 Error codes (part code 6610) (continued)
Part Error
Code Number
6610 59041
6610 59042
6610 59043
6610 59100
6610 59103
6610 59104
6610 591 1 1
6610 591 12
216 Message (part code group 6nnn)
Error Message
Warning:
A mainframe volume is included in the
journal volumes to be deleted.
Note that the following points if you have
made volume pairs by using this journal
before.
The mainframe volume will be
blocked.
The mainframe volume needs to be
formatted when you use the volume
as a non-journal volume.
The LDKC number, the CU number
and the LDEV number of the
mainframe volumes are recommended
to be recorded.
Do you want to continue the operation?
There are no valid journals.
The number of journal volumes in some
journals exceeds the maximum.
Adjust the number of journal volumes.
The same volume is stored more than
once in the Preview list.
Please use the sort function to identify
volumes with the same LDKC number,
the same CU number and the same LDEV
number.
There is no volume that can be registered
or deleted.
The specified parity group does not
contain volumes that can be registered
or deleted as journal volumes.
There are two or more CLPR numbers for
the specified data volume. In this
operation, please specify only one CLPR
number.
The CLPR number of the specified data
volume is different from the CLPR number
of the data volume in the Preview list. In
this operation, please specify only one
CLPR number.
Recommended Action
To delete the journal volume, click [Yes].
Otherwise, click [No].
HP recommends that you record the
LDKC number, the CU number and the
LDEV number of the mainframe volume.
All journals are used by Continuous
Access Journal Z or Continuous Access
Journal. If possible, delete the journals
for Continuous Access Journal Z or
Continuous Access Journal, then start the
Continuous Access Journal Z window or
the Continuous Access Journal window.
Reduce the number of journal volumes
to be registered, or increase the number
of journal volumes to be deleted.
Use the sort function to identify volumes
with the same LDKC number, the same
CU number and the same LDEV number.
Create a volume that can be used as a
journal volume. To do this, add a volume
or use some other way.
Specify another parity group.
Check the CLPR number for the specified
data volume, and specify only one CLPR
number.
Specify only the volume that has the
same CLPR number as the CLPR number
of the volume in the Preview list.
Severity
Level
W
W
W
W
W
W
W
W