HP StorageWorks P9000 - Disk Arrays Manual page 50

Table 22 Error codes (part code 00622) (continued)
Part Error
Code Number
00622 105266
00622 106055
00622 106056
00622 106057
00622 106086
00622 106525
00622 106526
00622 106527
00622 106528
00622 106529
00622 106530
00622 106531
00622 106532
00622 107001
50 Message (part code group 0nnn)
Error Message
Insufficient logical volumes to map the
external volumes.
The selected emulation type cannot be
set because a command device is set to
an external volume.
An emulation type that can not be set is
selected.
The cache mode cannot be enabled
because a command device is set to an
external volume.
The processing cannot continue because
the configuration having been set doesn't
consist with the current configuration
information.
The specified external storage system
does not exist in the configuration.
The specified mapping path does not
exist in the configuration.
The specified external path group does
not exist in the configuration.
The specified WWN does not exist in
the configuration.
The specified external volume does not
exist in the configuration.
The specified parity group does not exist
in the configuration.
The specified LUN does not exist in the
configuration.
The specified LDEV does not exist in the
configuration.
The processing cannot continue due to
an internal logic contradiction.
Recommended Action
Reduce the number of external volumes
to be mapped, then retry the operation.
Release the command device, or select
another volume.
Specify a supported emulation type.
Release the command device, or select
another volume.
If the same problem occurs again, close
the windows, and retry the operation
after the internal processing or the
configuration change has been
completed.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Severity
Level
W
W
W
W
E
E
E
E
E
E
E
E
E
E