Part Code 6510 - HP StorageWorks P9000 - Disk Arrays Manual

Table 54 Error codes (part code 6507) (continued)
Part Error
Code Number
6507 7070
6507 7071

Part code 6510

Table 55 Error codes (part code 6510)
Part Error
Code Number
6510 5030
6510 5137
6510 5138
6510 5140
6510 5141
6510 5142
6510 5143
6510 5144
6510 7301
6510 7302
6510 7303
6510 7440
6510 8101
6510 9006
6510 9009
6510 9021
204 Message (part code group 6nnn)
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
Error Message
The displayed information has not been
changed.
The Operation value is invalid. Specify
the correct value.
The value specified for Gathering Interval
is invalid. Specify a valid value within
the range of 1 to 15.
The specified CU number is incorrect.
Specify the correct CU number.
The specified LDEV number is incorrect.
Specify the correct LDEV number.
The specified GID is incorrect. Specify
the correct GID.
The specified LUN is incorrect. Specify
the correct LUN.
Some of the entered values are incorrect.
Check the values and then specify
correct values.
An error occurred in client logic.
An error occurred in client logic.
An error occurred in client logic.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
The system cannot apply the new
configuration. Do you want to refresh?
Exchange the channel cable connections
after confirmation of the port type.
The export is complete.
The Port Setting process has not
completed. Do you want to continue for
other ports?
Recommended Action
If the same error occurs despite retrying,
please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Recommended Action
Specify the data that you want to register
in the SVP, and retry the operation.
Check the contents, and retry.
Check the contents, and retry.
Specify the correct CU number.
Specify the correct device number.
Specify the correct group number.
Specify the correct LUN.
Check the values, then specify correct
values.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Click [Refresh], and retry.
Check the port type, then change cable
connections.
Click [OK].
To continue processing, click [Yes]. If the
processing finishes, reconfigure the port
that is not in operation.
Severity
Level
E
E
Severity
Level
W
W
W
W
W
W
W
W
E
E
E
E
W
i
i
i