HP StorageWorks P9000 - Disk Arrays Manual page 301

Table 91 Error codes (part code 20121) (continued)
Part Error Error Message
Code Number
20121 107024 A connection error has occurred.
20121 107025 The user session was interrupted.
20121 107026 An internal logic error occurred.
20121 107027 Login failed.
20121 107090 An internal logic error occurred.
20121 107091 An I/O error occurred during
downloading.
20121 107092 A security error occurred during
downloading.
20121 107093 An internal logic error occurred.
20121 107094 An I/O error occurred during uploading.
20121 107095 A security error occurred during
uploading.
20121 107096 A time-out error occurred on the Flash
Player.
20121 107097 No response from Flash Player.
20121 108001 Version mismatch between the Remote
Web Console and the SVP.
Recommended Action
Check the internet protocol (IP) address.
If the IP address is correct, terminate the
browser (also terminate the storage list
browser), then log it in again. If the
problem persists despite retrying, please
contact HP Technical Support.
Log in again.
If the same problem persists despite
retrying, please contact HP Technical
Support.
The cause might be one of the following.
Wait, then retry.
The number of user connections
reaches the upper limit.
SVP is in preparation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Clear the cache of JRE and browser
being used, then restart the browser and
retry the operation. When this problem
persists, contact your network
administrator because it might be a
problem of the proxy server. If this
problem still persists even if your network
does not have any problem, please
contact HP Technical Support.
Severity
Level
E
E
E
E
E
E
E
E
E
E
E
E
E
Part code 20121 301