HP StorageWorks P9000 - Disk Arrays Manual page 230

Table 59 Error codes (part code 7005) (continued)
Part Error
Code Number
7005 8640
7005 8641
7005 8642
7005 8643
7005 8644
7005 8645
7005 8646
7005 8647
7005 8648
7005 8649
7005 8650
7005 8651
7005 8652
7005 8653
230 Message (part code group 7nnn)
Error Message
The command has been rejected,
because the pair sharing the P-VOL was
in the Reverse Copy or Quick Restore
status.
The L1 pairs contain a pair in the
Reverse Copy or Quick Restore status.
The command has been rejected,
because the specified S-VOL is shared
as the P-VOL of the other pair and the
pair is in the COPY(RS-R) status.
The Pairresync operation has been
rejected, because the specified pair is
not in the state of PSUS.
The command has been rejected,
because the pair status is not PSUS or
PSUE.
The Reverse Copy command has been
rejected, because the P-VOL is shared
as the S-VOL of a Remote Copy pair.
The Reverse Copy request was rejected,
because the P-VOL was shared with a
Remote Copy pair in the non-suspend
status.
The Reverse Copy command has been
rejected, because the S-VOL is shared
as the S-VOL of a Remote Copy pair.
The boot device and the P-VOL do not
match in the Paircreate command.
Because the boot device is the S-VOL in
the Pairsplit-S command, the flag does
not match.
The boot device and the P-VOL do not
match in the Paircreate, Pairresync, or
Pairsplit-S command.
The SSID is invalid.
The boot device is not a P-VOL nor
S-VOL.
Because the boot device is the P-VOL in
the Pairsplit-S command, the flag does
not match.
Recommended Action
Wait until Reverse Copy or Quick
Restore completes.
Wait until Reverse Copy or Quick
Restore completes.
Wait until the status of the pair sharing
the P-VOL becomes PAIR, then retry the
operation.
See the section "Operations permitted
for L1, L2 pairs" in the HP StorageWorks
P9000 Business Copy User Guide for
the relation between the status of pairs
and Business Copy operations.
The Pairresync operation cannot be
executed in the current pair status.
See the section "Resynchronize pairs" in
the HP StorageWorks P9000 Business
Copy User Guide for the relation
between the state of pairs and the
Business Copy operations.
Check the pair status.
You cannot execute the specified
operation. Release the Remote Copy pair
for the operation.
Delete the Remote Copy pair.
Delete the Remote Copy pair.
Check the specified volume number.
Check the specified volume number.
Check the target volume number.
Check the contents, and retry.
Check the target volume number.
Check the target volume number.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W