HP StorageWorks P9000 - Disk Arrays Manual page 118

Table 46 Error codes (part code 5205) (continued)
Part Error
Code Number
5205 1221
5205 1222
5205 1223
5205 1224
5205 1225
5205 1226
5205 1227
5205 1228
5205 1229
5205 1230
5205 1231
5205 1232
5205 1233
5205 1234
1 18 Message (part code group 5nnn)
Error Message
The volume(s) are already used by Auto
LUN.
The number of the Business Copy Z or
Business Copy pair volumes has reached
the maximum.
The volume(s) are already used by Auto
LUN.
The volume(s) are already used by Auto
LUN.
The selected source volume and
destination volume are the same volume.
The volume(s) is already being used by
Remote Copy.
The volume(s) is already being used by
Remote Copy.
The RAID level of the target volume is not
supported.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The volume(s) is already being used by
Data Migration.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The volume specified as a migration
target cannot be migrated, because it is
used as P-VOL of Continuous Access
Synchronous, or Continuous Access
Synchronous Z.
Recommended Action
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
See Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide if the volumes of Business Copy
Z or Business Copy can be migrated.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
See "Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide if the volumes of Business Copy
Z or Business Copy can be migrated.
See "Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide if the volumes of Business Copy
Z or Business Copy can be migrated.
Release the Data Migration.
Specify another volume.
Specify another volume.
Specify another volume.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W