HP StorageWorks P9000 - Disk Arrays Manual page 266

Table 65 Error codes (part code 8105) (continued)
Part Error
Code Number
8105 5061
8105 5062
8105 551 1
8105 5566
8105 5650
8105 5651
8105 5652
8105 5660
8105 5700
8105 5701
8105 5702
8105 5705
8105 5710
8105 571 1
8105 5712
8105 5720
8105 5721
8105 5730
8105 5731
8105 5740
8105 5741
8105 5742
8105 5743
8105 5744
8105 5745
8105 5746
266 Message (part code group 8nnn)
Error Message
The number of lines is invalid.
The size of the CSV file is invalid.
Configuration File Loader is not installed.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
The length of the letter string is invalid.
The number of lines is invalid.
The size of the CSV file is invalid.
The Thin Provisioning volume is not
associated with a pool. Associate the
Thin Provisioning and a pool first.
The file format is invalid.
The header is invalid.
There is no tag.
Configuration File Loader is not installed.
The specified CHA does not exist.
The specified port does not exist.
The numbers specified for CU and LDEV
(CU: LDEV) are invalid.
You set the same tag name more than
once.
The parameter is invalid.
Duplicate definition error.
The current information is invalid.
There is a difference between the current
CHA and the specified CHA.
There is a difference between the current
port and the specified port.
The setting cannot be performed,
because an invalid Channel Speed value
is set to the specified port.
There is a difference between the current
CU:LDEV and the specified CU:LDEV.
The command device security switch
cannot be turned on because this is not
command device.
The security switch on the port is off. Turn
on the switch.
The group ID is invalid.
Recommended Action
The CSV file can have up to 70,000
lines.
Check the CSV file.
Install Configuration File Loader.
If this problem persists, please contact
HP Technical Support.
One line can have up to 127 letters.
The spreadsheet can have up to 70,000
lines.
Check the CSV file.
Associate the Thin Provisioning volume
with a pool, then retry the operation.
Enter the text file.
Check the version information of the first
row.
Write at least one tag.
Install the Configuration File Loader.
Correct the name of CHA.
Correct the name of the port.
Correct the numbers for CU and LDEV
(CU: LDEV).
Define each tag once in a sheet.
Correct the invalid parameter.
Write one definition only in each tag.
Correct the current information.
Correct the name of the CHA.
Correct the name of the port.
The Channel Speed value is invalid.
Specify a correct value.
Correct the CU and LDEV.
Turn on the command device switch.
Turn on the security switch on this port.
Correct the group ID.
Severity
Level
E
E
W
E
W
W
W
E
E
E
E
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W