Table 35 Error codes (part code 03122) (continued)
Part
Error
Code
Number
03122
106087
03122
106090
03122
106091
03122
106093
03122
106094
03122
107007
03122
107008
03122
107009
03122
107023
03122
109205
Part code 3205
Table 36 Error codes (part code 3205)
Part
Error
Code
Number
3205
201 1
3205
2015
3205
2087
3205
2095
3205
2201
96
Message (part code group 3nnn)
Error Message
The operation cannot be done because
there is no pool that can be associated
with a Thin Provisioning volume (V-VOL).
The depletion threshold is set lower than
the warning threshold.
The warning threshold is not input.
The depletion threshold is not input.
Two or more drive types with different
throughput coexist in the pool. In this
case, the performance of the entire pool
gets lower by the effect of the drive with
lower throughput. Are you sure you want
to apply it?
An internal logic error occurred.
The processing cannot continue due to
an internal logic contradiction.
An internal logic error occurred.
The processing cannot continue due to
an internal logic contradiction.
Are you sure you want to initialize all
pools?
Error Message
The status of the storage system requires
the maintenance (for example, the
storage system is blocked, the shared
memory is inconsistent, or some other
factor).
An error occurred while communicating
with the storage system.
The storage system is online to the
mainframe host.
Another maintenance processing or
failure handling is in progress.
Processing cannot be performed because
of Data Retention settings.
Recommended Action
Check the specified value of the
subscription limit, then retry the
operation.
Check the setting of depletion threshold
and warning threshold, then retry the
operation.
Check the setting of warning threshold,
then retry the operation.
Check the setting of the depletion
threshold, then retry the operation.
To continue the processing, click [OK].
Otherwise, click [Cancel].
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Click [OK] to continue, or click [Cancel]
to cancel the processing.
Recommended Action
Check the status of the storage system (if
the storage system is blocked, shared
memory is inconsistent, or some other
factor). If this problem persists, please
contact HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Take the storage system offline from the
connected host.
Wait for a while, then retry the
operation.
Release the setting of Data Retention,
then retry the operation.
Severity
Level
W
W
W
W
W
E
E
E
E
E
Severity
Level
E
E
W
W
W
Need help?
Do you have a question about the StorageWorks P9000 - Disk Arrays and is the answer not in the manual?