Part Code 9605 - HP StorageWorks P9000 - Disk Arrays Manual

Hp storageworks p9000 remote web console messages (av400-96351, january 2011)
Hide thumbs Also See for StorageWorks P9000 - Disk Arrays:
Table of Contents

Advertisement

Part code 9605

Table 85 Error codes (part code 9605)
Part
Error
Code
Number
9605
5013
9605
5030
9605
5041
9605
551 1
9605
5809
9605
6012
9605
6023
9605
6038
9605
6502
9605
6533
9605
7060
9605
71 1 1
9605
7310
9605
8001
9605
8002
9605
8102
9605
8120
9605
8122
9605
8123
9605
8124
9605
8125
9605
8126
Error Message
An error occurred during SVP
processing.
No commands are issued.
The number of issued commands exceeds
the maximum.
The program product is not installed.
The number of requests for combining
LUs does not match the number of the
LUs.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The mistake is found in the set
parameter.
Processing in progress. Please wait for
a while, and then retry the operation.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
This error code is not registered.
An error occurred while connecting to
the subsystem. Please retry a little later.
A communication time-out error occurred
in the subsystem. Please wait for a while,
and then retry the operation.
This function is not supported.
The specified logical volume does not
exist.
This logical volume is busy.
This function is not supported.
This logical volume is a mainframe
volume.
The attribute of the logical volume has
been changed by RAID Manager.
This logical volume is configured as a
command device.
Recommended Action
If this problem persists, please contact
HP Technical Support.
Issue a command again.
Decrease the number of commands.
Install Program Product.
Review LUs, and retry the operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Wait a few minutes, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Retry a little later.
Retry a little later.
Check if the DKCMAIN and SVP
microcode versions are mismatched.
Specify an open-system volume.
Retry a little later.
Check if the DKCMAIN and SVP
microcode versions are mismatched.
Specify an open-system volume.
Review LDEV information, then retry.
Check the logical volume configuration,
then retry the operation.
Severity
Level
E
W
W
W
W
E
E
E
W
E
E
E
E
W
W
E
W
W
E
W
W
W
Part code 9605 289

Advertisement

Table of Contents
loading

Table of Contents