HP StorageWorks P9000 - Disk Arrays Manual page 148

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 8907
6005 8908
6005 8909
6005 8910
6005 891 1
6005 8912
6005 8913
6005 8914
6005 8915
6005 8921
6005 8924
6005 8926
6005 8927
6005 8929
6005 8930
6005 8931
148 Message (part code group 6nnn)
Error Message
The extended SM is not equipped in
RCU.
Invalid parameter.
A Port exchange error occurred.
A Port exchange error occurred.
Logical paths exist on the port.
Logical paths exist on the port.
Invalid port type.
Multi platform feature already installed
in subsystem.
The port type exchange operation is
rejected because the host(s) is(are)
processing the port type exchange.
The specified M-VOL must not be in an
intervention-required condition, in a
protection condition, in an unusable
condition, the Business Copy/Business
Copy Z T-VOL/reserved volume or a
reserved volume of Auto LUN.
Logical paths exist on the RCU port.
The specified R-VOL is prohibited to use
by Volume Security for Mainframe.
The specified M-VOL is prohibited to use
by Volume Security for Mainframe.
Invalid port type.
Logical paths exist on the RCU port.
Logical paths exist on the RCU port.
Recommended Action
Install the extended shared memory to
RCU according to the installation
instruction of the extended shared
memory for remote copy ("Shared
Memory Size Configuration" dialog
box).
Specify a correct value.
Please contact HP Technical Support.
Please contact HP Technical Support.
Delete the LUs defined on the specified
port, then retry the operation.
Delete the LUs defined on the specified
port, then retry the operation.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
The multiplatform feature has already
been installed in the storage system.
Verify the configuration of the storage
system.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the status of the specified M-VOL.
Delete the LUs defined on the specified
port, then retry the operation.
Confirm the status of Volume Security for
Mainframe of the specified R-VOL.
Confirm the status of Volume Security for
Mainframe of the specified M-VOL.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Delete the LUs defined on the specified
port, then retry the operation.
Delete the LUs defined on the specified
port, then retry the operation.
Severity
Level
E
W
E
E
W
W
W
W
W
W
W
W
W
W
W
W