HP StorageWorks P9000 - Disk Arrays Manual page 123

Table 46 Error codes (part code 5205) (continued)
Part Error Error Message
Code Number
5205 7420 There is insufficient Auto LUN data to
create migration plans. Check the
following:
The time setting for the sampling term
The monitoring term
5205 7421 A proper migration plan cannot be made
by this function. Check the following
items.
Reserve volume location.
The maximum threshold value of the
class.
5205 7422 A memory allocation error occurred.
5205 7423 An internal error occurred.
5205 7424 Failed to delete all plans.
5205 7426 Failed to delete plan.
5205 8001 An error occurred while connecting to
the subsystem.
5205 8002 The storage system status is invalid.
5205 8100 This function is not supported.
5205 8102 This function is not supported.
5205 8525 An internal logic error occurred.
5205 8526 An internal logic error occurred.
5205 8528 An internal logic error occurred.
5205 8529 An internal logic error occurred.
5205 8530 An internal logic error occurred.
5205 8531 An internal logic error occurred.
5205 8671 The sizes of the source and the target
volumes are not equal.
Recommended Action
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
-
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
Check the volume, or quit using Remote
Copy.
Check the volume, or quit using Remote
Copy.
Check the volume, or quit using Remote
Copy.
Check the volume, or quit using Remote
Copy.
Check the volume, or quit using Remote
Copy.
Check the volume, or quit using Remote
Copy.
Specify the volumes with the same size
for the source and the target of
migration, then retry the operation.
Severity
Level
W
W
W
E
W
W
E
E
W
W
E
E
E
E
E
E
W
Part code 5205 123