HP StorageWorks P9000 - Disk Arrays Manual page 98

Table 36 Error codes (part code 3205) (continued)
Part Error
Code Number
3205 8102
3205 8140
3205 8958
3205 8966
3205 56513
3205 56516
3205 56517
3205 56519
3205 56520
3205 58406
3205 58407
3205 65740
3205 65794
3205 65795
3205 66013
3205 66014
3205 66503
98 Message (part code group 3nnn)
Error Message
This function is not supported.
The configuration of Compatible
FlashCopy is defined.
An error occurred on the DKC side.
An error occurred on the DKC side.
An emulation type that cannot be added
is specified.
The configuration of Continuous Access
Synchronous or Continuous Access
Synchronous Z is defined.
The configuration of Business Copy,
Business Copy Z, or Snapshot is defined.
The reserve volume setting for Business
Copy or Business Copy Z is defined.
The reserved volume setting for Auto LUN
is defined.
The configuration of Continuous Access
Journal or Continuous Access Journal Z
is defined.
The reserved volume setting for
Continuous Access Journal or Continuous
Access Journal Z is defined.
The configuration changing processes
are conflicting at DKC.
The specified V-VOL is not mounted.
The specified V-VOL has already been
specified.
The specified emulation type cannot be
set because 3390-3R is set in the storage
system.
The specified emulation type cannot be
set because 3390-3 is set in the storage
system.
LDKC, CU, and LDEV are not set within
the range where they can be used.
Recommended Action
Check whether the DKCMAIN
microprogram version and the SVP
microprogram version are mismatched.
Release the configuration definition of
Compatible FlashCopy, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check the emulation type. If you want to
change the cache segment size to set the
specified emulation type, please contact
HP Technical Support.
Release the configuration definition for
Continuous Access Synchronous or
Continuous Access Synchronous Z, then
retry the operation.
Release the configuration definition for
Business Copy, Business Copy Z, or
Snapshot, then retry the operation.
Release the reserved volume setting for
Business Copy or Business Copy Z, then
retry the operation.
Release the reserved volume setting for
Auto LUN, then retry the operation.
Release the configuration definition of
Continuous Access Journal or Continuous
Access Journal Z, then retry the
operation.
Release the journal volume setting of
Continuous Access Journal or Continuous
Access Journal Z, then retry the
operation.
Check if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
Check the specified V-VOL.
Exclude the duplicated setting, then retry
the operation.
Change the emulation type to be set in
the volume.
Change the emulation type to be set in
the volume.
Check the setting of LDKC, CU, and
LDEV.
Severity
Level
W
W
E
E
W
W
W
W
W
W
W
W
W
W
W
W
W