HP StorageWorks P9000 - Disk Arrays Manual page 142

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 8795
6005 8796
6005 8797
6005 8798
6005 8799
6005 8800
6005 8801
6005 8808
142 Message (part code group 6nnn)
Error Message
The operation failed because the
specified M-VOL applied to any of the
following:
A T-VOL of Business Copy Z which is
not in the Split pair (PSUS) status.
An S-VOL of Business Copy which is
not in the Split pair (PSUS) status.
A reserved volume of Business Copy
Z or Business Copy.
A volume used in Business Copy Z or
Business Copy in Reverse Copy
status.
A T-VOL of Compatible FlashCopy.
A FICON(R) Data Migration Source
Volume.
The operation failed because the
specified R-VOL applied to any of the
following:
A T-VOL of Business Copy Z or
Compatible FlashCopy.
An S-VOL of Business Copy.
A reserved volume of Business Copy
Z or Business Copy.
A volume of Business Copy Z or
Business Copy in Reverse Copy
status.
A volume of FICON(R) Data
Migration.
If the M-VOL is a Business Copy
Z/Compatible FlashCopy T-VOL, one
S-VOL must be paired with one T-VOL.
If the M-VOL is a Business Copy S-VOL,
one P-VOL must be paired with one
S-VOL.
The MCU is already used for Business
Copy Z/Business Copy/Compatible
FlashCopy.
The M-VOL is already in use for Auto
LUN.
The R-VOL is already in use for Auto
LUN.
The R-VOL is reserved, or the RCU or the
path between MCU-RCU is in a heavy
load condition.
Please retry Add Pair(Paircreate)/Resume
Pair(Pairresync) operation in a few
minutes.
Recommended Action
Check the status of the specified M-VOL
from the host or the SVP.
Check the status of the specified R-VOL
from the host or the SVP.
Check the status of the specified M-VOL
from the host or the SVP.
Confirm the status of Business Copy
Z/Business Copy/Compatible FlashCopy
in MCU from the host or the SVP.
Verify the status of the specified M-VOL.
Verify the status of the specified R-VOL.
Verify the status of the specified R-VOL.
If the device is not reserved, retry the
operation.
The add/resume pair operation failed,
because the either the specified volume
or another volume in the same group is
being changed to simplex or suspend
status. Retry the operation after the status
change is completed.
Severity
Level
W
W
W
W
W
W
W
W