Table of Contents
Advertisement
Chapter 4
Commands for the Cisco uBR10012 Router
Command
debug pxf
show pxf cpu
show pxf dma
show pxf microcode
show pxf xcm
OL-1581-08
Description
Enables debugging of the PXF subsystems on the active PRE1 module on
the Cisco uBR10012 router.
Displays the display different statistics about the operation of the CPU
processor during PXF processing.
Displays information for the current state of the PXF DMA buffers,
counters, and registers.
Displays identifying information for the microcode being used on the
processor.
Displays the current state of ECC for the External Column Memory (XCM)
on the PXF processor.
Cisco Broadband Cable Command Reference Guide
clear pxf
4-13
Advertisement
Table of Contents
