Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show cable modem offline
To display a list of the CMs that are marked as offline with the Cisco CMTS, use the show cable modem
offline command in privileged EXEC mode.
Syntax Description
ip-address
mac-address
cable slot/port
cable slot/subslot/port
upstream port
Defaults
Displays a list of all offline CMs known by the Cisco CMTS router.
Command Modes
Privileged EXEC
Command History
Release
12.0(7)XR and
12.1(1a)T1
12.2(4)BC1
OL-1581-08
show cable modem [ip-address | mac-address] offline
show cable modem cable slot/port [upstream port] offline
show cable modem cable slot/subslot/port [upstream port] offline
(Optional) Displays information for the offline CM with the specified IP
address.
(Optional) Displays information for the offline CM with the specified MAC
address.
(Optional) Displays information for all offline CMs that last used the
specified cable interface and downstream port on the Cisco uBR7100 series
and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0
or 1, depending on the cable interface.
(Optional) Displays information for all offline CMs that last used the
specified cable interface on the Cisco uBR10012 router. The following are
the valid values:
•
•
•
(Optional) Displays information for all CMs using this specific upstream.
You can specify this option only when displaying information for a cable
interface. The valid range for port begins with 0 and ends with a value that
depends on the number of upstream ports on the cable interface line card.
Modification
This command was introduced.
This command was supported on the Cisco uBR10012 router.
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
Cisco Broadband Cable Command Reference Guide
show cable modem offline
3-97
Advertisement
Table of Contents
