Table of Contents
Advertisement
cable upstream data-backoff
Examples
The following example shows how to set the automatic data backoff values for upstream 2 on a cable
interface card:
Router# configure terminal
Router(config)# interface cable 3/0
Router(config-if)# cable upstream 2 data-backoff automatic
Router(config-if)#
Related Commands
Command
cable insertion-interval
cable upstream range-
backoff
show controllers cable
Cisco Broadband Cable Command Reference Guide
2-298
Description
Configures the interval between consecutive initial ranging
slots on an upstream.
Specifies automatic or configured initial ranging backoff
calculation.
Displays the backoff window setting for the configured
upstream port.
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
