Table of Contents
Advertisement
show cable load-balance
Table 13
show cable load-balance Field Descriptions (default display) (continued)
Field
Target interface
Retries
Related Commands
Command
cable load-balance
exclude
cable load-balance
group (global
configuration)
cable load-balance
group (interface
configuration)
cable load-balance
group interval
cable load-balance
group policy ugs
cable load-balance
group threshold
cable upstream load-
balance group
clear cable load-
balance
Cisco Broadband Cable Command Reference Guide
3-48
Description
Downstream or upstream cable interface to which the CMTS is trying to move the cable
modem, so as to load balance the interfaces in this load balance group. If the CMTS is moving
the cable modem to a different frequency on the same downstream interface, this field shows
only the new center frequency.
Number of times that the CMTS has attempted to move this cable modem to the target
interface. The CMTS attempts to move the cable modem five times before stopping any further
attempts and counting this load balancing move as a failure.
Description
Excludes a particular cable modem, or all cable modems from a particular
vendor, from one or more types of load-balancing operations.
Creates and configures a load-balance group.
Assigns a downstream to a load-balance group.
Configures the frequency of the load-balancing policy updates.
Configures how the Cisco CMTS should load balance cable modems with
active unsolicited grant service (UGS) service flows.
Configures the threshold values that a load-balance group should use for
load-balancing operations.
Assigns an upstream to a load-balance group.
Clears the counters or state machine used to track load-balancing
operations.
Chapter 3
Cisco CMTS Show Commands
OL-1581-08
Advertisement
Table of Contents
