Table of Contents
Advertisement
Chapter 5
Cisco CMTS Debugging Commands
6d00h: Send pkt size 1020 encsize 6 from 0002.4a1d.dc1d on ATM2/0:1/1 to 000C.0807.0605 on
Cable4/0:0x1
6d00h: Fwd pkt size 74 from 000C.0807.0605 on Cable4/0:0x1 to 0900.07ff.ffff on ATM2/0:1/1
Router#
Related Commands
Command
cable dot1q-vc-map
cable l2-vpn-service
atm-vc
cable l2-vpn-service
dot1q
cable vc-map
debug cable interface
debug cable
mac-address
show cable l2-vpn
dot1q-vc-map
show cable l2-vpn
vc-map
OL-1581-08
Description
Maps a cable modem to a particular Virtual Local Area Network (VLAN)
on a local outbound Ethernet interface.
Enables the use of Layer 2 tunnels for the Customer Premises Equipment
(CPE) traffic that is behind cable modems, so that individual CPE traffic can
be routed to a particular PVC on an ATM interface.
Enables the use of Layer 2 tunnels so that traffic for individual cable
modems can be routed over a particular Virtual Local Area Network
(VLAN).
Maps a cable modem to a particular PVC on an ATM interface.
Enables debugging output for a specific cable interface.
Enables debugging output for the cable modems that match the specified
hardware (MAC) address or range of addresses.
Displays the mapping of one or all cable modems to IEEE 802.1Q Virtual
Local Area Networks (VLANs) on the router's Ethernet interfaces.
Displays the mapping of one or all cable modems to PVCs on the ATM
interfaces.
Cisco Broadband Cable Command Reference Guide
debug cable l2-vpn
5-45
Advertisement
Table of Contents
