Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show crypto ca trustpoints
To display the Root certificate that the Cisco CMTS has learned after the first cable modem has
registered with BPI+ encryption, use the show crypto ca trustpoints command in privileged EXEC
mode.
Syntax Description
No default behaviors or values
Command Modes
Privileged EXEC
Command History
Release
12.3(9a)BC
Usage Guidelines
The show crypto ca trustpoints command does not display the root certificate until after at least one
Note
cable modem has registered with the Cisco CMTS using BPI+ encryption. Alternatively, you can use the
unsupported command test cable generate in privileged EXEC mode to force the Cisco CMTS to
register the root certificate.
To display all certificates (Root, Manufacturers, CM) that the CMTS has learned, use the show crypto
Tip
ca certificates command.
For additional information about using the show crypto commands on the Cisco CMTS, refer to the
"Configuring DOCSIS 1.1 on the Cisco CMTS" chapter of the Cisco CMTS Feature Guide:
Examples
The following example illustrates the show crypto ca trustpoints command with
Cisco IOS Release 12.3(9a)BC:
Router# show crypto ca trustpoints
Root certificate
Status: Available
Certificate Serial Number: D54BB68FE934324F6B8FD0E41A65D867
Key Usage: General Purpose
Issuer:
CN = DOCSIS Cable Modem Root Certificate Authority
OU = Cable Modems
O = Data Over Cable Service Interface Specifications
C = US
Subject Name:
CN = "BPI Cable Modem Root Certificate Authority "
OU = DOCSIS
O = BPI
C = US
Validity Date:
start date: 07:00:00 UTC Mar 27 2001
end
OL-1581-08
show crypto ca trustpoints
Modification
This command was introduced.
http://www.cisco.com/en/US/products/hw/cable/ps2217/products_feature_guide_chapter09186a00
8019b57f.html
date: 06:59:59 UTC Jan 1 2007
Cisco Broadband Cable Command Reference Guide
show crypto ca trustpoints
3-187
Advertisement
Table of Contents
