Table of Contents
Advertisement
Chapter 2
Cisco CMTS Configuration Commands
Examples
The following example shows the commands needed so that the CMTS will begin using the power
averaging adjustment method when 50 percent of Ranging Requests result in a power adjustment beyond
the threshold level of 2 dB:
router(config)# interface c6/0
router(config-if)# cable upstream 0 power-adjust threshold 2
router(config-if)# cable upstream 0 power-adjust noise 50
router(config-if)#
Related Commands
Command
cable upstream frequency
cable upstream power-level
show cable flap-list
show cable modem
OL-1581-08
Description
Configures a fixed frequency of the upstream RF carrier for an
upstream port.
Sets the input power level for the upstream radio frequency (RF)
carrier.
Displays a list of CMs that have exceeded the threshold number of
power adjustments.
Displays CM configuration settings.
Cisco Broadband Cable Command Reference Guide
cable upstream power-adjust
2-339
Advertisement
Table of Contents
