Table of Contents
Advertisement
cable-modem qos drop-ack
Examples
The following example shows how to disable the TCP packet optimization feature on the cable interface,
so that all TCP packet acknowledgements are sent:
Router(config)# interface cable-modem 0
Router(config-if)# no cable-modem qos drop-ack
Router(config-if)#
The following example shows how to enable the TCP packet optimization feature on the cable interface.
This is the default configuration, so it does not need to be done unless it has been previously disabled.
Router(config)# interface cable-modem 0
Router(config-if)# cable-modem qos drop-ack
Router(config-if)#
Related Commands
Command
show controllers cable-modem
qos
Cisco Broadband Cable Command Reference Guide
6-16
Description
Displays detailed information about the Quality of Service (QoS)
configuration.
Chapter 6
Cable CPE Commands
OL-1581-07
Advertisement
Table of Contents
