Table of Contents
Advertisement
Appendix A
Using the ROM Monitor
unalias
To delete a currently-defined alias, use the unalias command in ROM monitor mode.
Syntax Description
name
name2 name3 ...
Defaults
No default behavior or values.
Command Modes
ROM monitor
Command History
Release
11.3 NA
12.1(5)EC
12.2(4)BC1
Usage Guidelines
The unalias command deletes one or more aliases that you have previously defined for the ROM monitor
using the
Examples
The following example shows how to delete one alias:
rommon 13 > unalias dird
rommon 14 >
The following example shows three aliases being deleted:
rommon 20 > unalias alias1 alias2 alias3
rommon 21 >
The following example shows the error message that is displayed when you try to delete an alias that
does not exist:
rommon 11 > unalias gobbledegook
unalias: "gobbledegook" does not exist
rommon 12>
OL-1581-07
unalias name [name2 name3 ...]
Specifies the alias to be deleted.
(Optional) Specifies additional aliases to be deleted.
Modification
This command was introduced on Cisco uBR7200 series routers.
Support was added for Cisco uBR7100 series routers.
Support was added for the Cisco uBR10012 router. Changes were also made
to the boot procedure after breaking into ROMMON to ensure that all
hardware and software registers are in a known state before loading the new
image.
alias
command.
Cisco Broadband Cable Command Reference Guide
unalias
A-47
Advertisement
Table of Contents
