Table of Contents
Advertisement
frame
frame
To display an individual stack frame, use the frame command in ROM monitor mode.
Syntax Description
number
Defaults
Displays stack frame 0.
Command Modes
ROM monitor
Command History
Release
11.3 NA
12.1(5)EC
12.2(4)BC1
Usage Guidelines
The frame command displays a particular stack frame. Use the
frames and their frame numbers.
Examples
The following example shows the frame command being used to display the details of an individual
frame displayed by the
rommon 5 > stack 6
Stack trace:
PC = 0x02004adc
Frame 00: FP = 0x02003938
Frame 01: FP = 0x02003948
Frame 02: FP = 0x02003960
Frame 03: FP = 0x02003994
Frame 04: FP = 0x02003b00
Frame 04: FP = 0x02003b34
rommon 6 > frame 2
Cisco Broadband Cable Command Reference Guide
A-26
frame [number]
(Optional) Number of the stack frame to be displayed. The default is 0 (the most
current frame).
Modification
This command was introduced on Cisco uBR7200 series routers.
Support was added for Cisco uBR7100 series routers.
Support was added for the Cisco uBR10012 router. Changes were also made
to the boot procedure after breaking into ROMMON to ensure that all
hardware and software registers are in a known state before loading the new
image.
stack
command:
Frame 02: FP = 0x02003960
at 0x02003968 (fp + 0x08) = 0x02004f8d
at 0x0200396c (fp + 0x0c) = 0x0200f390
at 0x02003970 (fp + 0x10) = 0x02006afc
at 0x02003974 (fp + 0x14) = 0xc0a82983
at 0x02003978 (fp + 0x18) = 0x02003a7e
at 0x0200397c (fp + 0x1c) = 0x02002630
RA = 0x02005f2a
RA = 0x02005df0
RA = 0x020050ee
RA = 0x02004034
RA = 0x00012ca6
RA = 0x020a703c
RA = 0x020050ee
Appendix A
Using the ROM Monitor
stack
command to list the available stack
OL-1581-07
Advertisement
Table of Contents
