Cisco SR2016T-NA Reference Manual page 1024

clear crypto engine accelerator counter
clear crypto engine accelerator counter
To reset the statistical and error counters for the router's hardware accelerator to zero, use the clear
crypto engine accelerator counter command in Privileged EXEC mode.
Cisco uBR905, uBR925 cable access routers
Syntax Description This command has no arguments or keywords.
Defaults
No default behavior or values.
Command Modes Privileged EXEC
Command History Release
12.1(3)XL
12.2(2)XA
Examples The following example clears the router's statistical and error counters to zero:
Router# clear crypto engine accelerator counter
Router#
Related Commands Command
crypto ca
crypto cisco
crypto dynamic-map
crypto engine accelerator
crypto ipsec
crypto isakmp
crypto key
crypto map
debug crypto engine
accelerator control
debug crypto engine
accelerator packet
Cisco Broadband Cable Command Reference Guide
6-22
clear crypto engine accelerator counter
Modification
This command was introduced for the Cisco uBR905 cable access router.
Support was added for the Cisco uBR925 cable access router.
Description
Defines the parameters for the certification authority used for a
session.
Defines the encryption algorithms and other parameters for a
session.
Creates a dynamic map crypto configuration for a session.
Enables the use of the Cisco uBR905 and Cisco uBR925 router's
onboard hardware accelerator for IPSec encryption.
Defines the IPSec security associations and transformation sets.
Enables and defines the IKE protocol and its parameters.
Generates and exchanges keys for a cryptographic session.
Creates and modifies a crypto map for a session.
Displays each control command as it is given to the crypto engine.
Displays information about each packet sent for encryption and
decryption.
Chapter 6 Cable CPE Commands
OL-1581-07