Cisco SR2016T-NA Reference Manual page 1162

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

show crypto ipsec client ezvpn
Router#
The following example shows a typical display from the show crypto ipsec client ezvpn command for
an inactive VPN connection:
Router# show crypto ipsec client ezvpn
Current State: IDLE
Last Event: REMOVE INTERFACE CFG
Router#
Table 6-27
Table 6-27 show crypto ipsec client ezvpn Field Descriptions
Field
Current State
Last Event
Address
Mask
DNS Primary
DNS Secondary
Domain Name
NBMS/WINS
Primary
NBMS/WINS
Secondary
In Cisco IOS Release 12.2(8)T and later releases, you can add a timestamp to show commands using the
Tip
exec prompt timestamp command in line configuration mode.
Related Commands
Command
clear crypto ipsec
client ezvpn
crypto ipsec client
ezvpn xauth
crypto ipsec client
ezvpn (global
configuration)
Cisco Broadband Cable Command Reference Guide
6-160
Mask
: 255.255.255.128
Protocol
: 0x0
Source Port: 0
Dest Port
: 0
describes the fields shown by the show crypto ipsec client ezvpn command:
Description
Displays whether the VPN tunnel connection is active or idle. Typically, when
the tunnel is up, the current state is IPSEC ACTIVE.
Displays the last event performed on the VPN tunnel. Typically, the last event
before a tunnel is created is SOCKET UP.
Displays the IP address used on the outside interface.
Displays the subnet mask used for the outside interface.
Displays the primary domain name system (DNS) server provided by the
dynamic host configuration protocol (DHCP) server.
Displays the secondary DNS server provided by the DHCP server.
Displays the domain name provided by the DHCP server.
Displays the primary NetBIOS Microsoft Windows Name Server provided by the
DHCP server.
Displays the secondary NetBIOS Microsoft Windows Name Server provided by
the DHCP server.
Description
Resets the Cisco Easy VPN Remote state machine and bring down the
Cisco Easy VPN Remote connection.
Responds to a pending VPN authorization request.
(Global configuration mode) Creates a Cisco Easy VPN Remote
configuration.
Chapter 6
Cable CPE Commands
OL-1581-07

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents