Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show packetcable gate counter commit
To display the total number of gates that the CMTS has put into the COMMITTED state since the CMTS
was last reset or since the counter was last cleared, use the show packetcable gate counter commit
command in user EXEC or privileged EXEC mode.
Syntax Description
This command has no keywords or arguments.
Defaults
No default behavior or values.
Command Modes
User EXEC, Privileged EXEC
Command History
Release
12.2(8)BC2
12.2(15)BC1
Usage Guidelines
This command displays the total number of gates that have been committed since the Cisco uBR7200
series router was restarted or since the counter was last cleared with the
commit
Note
This command displays only the count of committed gates. It does not include gates that were allocated,
authorized, and reserved but that were not put into the COMMITTED state.
Examples
The following example shows that 132 gates have been committed since the Cisco CMTS was last reset
or since the counters were last cleared:
Router# show packetcable gate counter commit
Total Gates committed (since bootup or clear counter) = 132
Router#
Related Commands
Command
clear packetcable gate
counter commit
packetcable
OL-1581-08
show packetcable gate counter commit
Modification
This command was introduced for the Cisco uBR7200 series universal
broadband router.
Support was added for the Cisco uBR10012 router.
command.
Description
Resets the counters that track the total number of committed gates.
Enables PacketCable operations on the Cisco CMTS.
show packetcable gate counter commit
clear packetcable gate counter
Cisco Broadband Cable Command Reference Guide
3-255
Advertisement
Table of Contents
