Cisco SR2016T-NA Reference Manual page 687

Chapter 3 Cisco CMTS Show Commands
Table 3-48
Table 3-48 show diag Field Descriptions
Field
MC11 port adapter
Port adapter is analyzed
Port adapter insertion time
Hardware Revision
Part Number
Board Revision
Deviation Number
Fab Version
PCB Serial Number
RMA Test History
RMA Number
RMA History
Calibration Data
Calibration values
Unknown Field (type)
EEPROM format version
EEPROM contents (hex)
Tip In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands Command
show dial-peer voice
show voice dsp
show voice port
OL-1581-08
0x30: C8 09 F8 08 03 5D 43 3F 05 17 94 83 83 FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
describes the fields displayed by the show diag command.
Description
Line card type.
The system has identified the Cisco CMTS port adapter.
Elapsed time since insertion.
Version number of the Cisco CMTS port adapter.
In the Cisco CMTS, the part number of the port adapter.
Revision number (signifying a minor revision) of the Cisco CMTS
port adapter.
Revision number (signifying a minor deviation) of the
Cisco CMTS port adapter.
Manufacturing fabrication version number.
Serial number of the printed circuit board.
Counter indicating how many times diagnostics have been
performed on this port adapter.
Return material authorization number, which is an administrative
number assigned if port adapter needs to be returned for repair.
Counter indicating how many times the port adapter has been
returned and repaired.
Input power calibration range.
Upstream port gain calibration constant.
Unrecognized EEPROM fields.
Version number of the EEPROM format.
Dumps of EEPROM programmed data.
Description
Displays configuration information and call statistics for dial peers.
Displays the current status of all DSP voice channels on the Cisco MC3810
multiservice concentrator.
Displays configuration information about a specific voice port.
Cisco Broadband Cable Command Reference Guide
show diag
3-191