Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show cable privacy
To display BPI+ certificate information for the Cisco CMTS router, use the show cable privacy
command in privileged EXEC mode.
Syntax Description
manufacturer-cert-list Displays the BPI manufacturer certificate verification list.
root-cert-list
Defaults
No default behaviors or values
Command Modes
Privileged EXEC
Command History
Release
11.3 NA
12.1(7)CX,
12.2(1)XF1, and
12.2(4)BC1
Usage Guidelines
This command appears and is available only in images that support BPI and BPI+ encryption.
Examples
The following examples show how to display BPI+ certificate information using the show cable privacy
command:
Router# show cable privacy manufacturer-cert-list
Cable Manufacturer certificate chain:
<certificate dump>
Router# show cable privacy root-cert-list
Cable Root certificate chain:
<certificate dump>
Router#
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
OL-1581-08
show cable privacy {manufacturer-cert-list | root-cert-list}
Displays the BPI root certificate verification list.
Modification
This command was introduced in a different form and its functions moved to
the
show interface cable privacy
This command was introduced in its current form.
command.
Cisco Broadband Cable Command Reference Guide
show cable privacy
3-141
Advertisement
Table of Contents
