Show Cable Modem Unregistered - Cisco SR2016T-NA Reference Manual

show cable modem unregistered

show cable modem unregistered
To display a list of the CMs that are marked as unregistered with the Cisco CMTS, use the show cable
modem unregistered command in privileged EXEC mode.
Syntax Description
ip-address
mac-address
cable slot/port
cable slot/subslot/port
upstream port
Defaults
Displays a list of all unregistered CMs on the Cisco CMTS router.
Command Modes Privileged EXEC
Command History Release
11.3 NA
12.2(4)BC1
Cisco Broadband Cable Command Reference Guide
3-124
show cable modem [ip-address | mac-address] unregistered
show cable modem cable slot/port [upstream port] unregistered
show cable modem cable slot/subslot/port [upstream port] unregistered
(Optional) Displays information for the unregistered CM with the specified
IP address.
(Optional) Displays information for the unregistered CM with the specified
MAC address.
(Optional) Displays information for all unregistered CMs on the specified
cable interface and downstream port on the Cisco uBR7100 series and
Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can be 0
or 1, depending on the cable interface.
(Optional) Displays information for all unregistered CMs on the specified
cable interface on the Cisco uBR10012 router. The following are the valid
values:
•
•
•
(Optional) Displays information for all CMs using this specific upstream.
You can specify this option only when displaying information for a cable
interface. The valid range for port begins with 0 and ends with a value that
depends on the number of upstream ports on the cable interface line card.
Modification
This command was introduced.
This command was supported on the Cisco uBR10012 router.
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
Chapter 3 Cisco CMTS Show Commands
OL-1581-08