Cisco SR2016T-NA Reference Manual page 628

Reference guide
Hide thumbs Also See for SR2016T-NA:
Table of Contents

Advertisement

show cable modulation-profile
show cable modulation-profile
To display modulation profile group information for a Cisco CMTS, use the show cable modulation-
profile command in privileged EXEC mode.
Syntax Description
profile
verbose
iuc-code
cable slot/port
cable slot/subslot/port
upstream port
1. The Cisco CMTS recognizes the reqdata burst type but does not use it.
Command Modes
Privileged EXEC
Command History
Release
11.3 XA
12.(0)5T1, 12.0(6)SC,
12.1(2)EC
Cisco Broadband Cable Command Reference Guide
3-132
show cable modulation-profile [profile [verbose] ] [iuc-code]
show cable modulation-profile cable {slot/port | slot/subslot/port} [upstream port]
Modification
This command was first introduced.
This command was supported, replacing the
command.
(Optional) Profile number. Valid values start with 1.
(Optional) Displays detailed information for an individual profile.
(Optional) Internal usage code (IUC). Valid options are:
a-long—Advanced Phy Long Grant Burst (IUC 10)
a-short—Advanced Phy Short Grant Burst (IUC 9)
a-ugs—Advanced Phy Unsolicited Grant Burst (IUC 11)
initial—Initial Ranging Burst (IUC 3)
long—Long Grant Burst (IUC 6)
reqdata—Request/Data Burst (IUC 2)
request—Request Burst (IUC 1)
short—Short Grant Burst (IUC 5)
station—Station Ranging Burst (IUC 4)
Identifies a cable interface and downstream port on the Cisco uBR7100
series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can
be 0 or 1, depending on the cable interface.
Identifies a cable interface on the Cisco uBR10012 router. The
following are the valid values:
slot = 5 to 8
subslot = 0 or 1
port = 0 to 4 (depending on the cable interface)
(Optional) Displays information for a particular upstream on the
selected cable interface. The port value starts with 0 and continues up,
depending on the type of cable interface card.
Chapter 3
Cisco CMTS Show Commands
1
show cable burst-profile
OL-1581-08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Broadband cable

Table of Contents