Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
Table 3-58
Table 3-58
Field
Sfid
PHSI
PHSS
PHSV
PHSM
PHSF
Note
The PHS packet counters are not supported on the Cisco uBR-MC5X20 card and always shows 0 or N/A,
depending on the software release.
Related Commands
cable service class
cable service flow
inactivity-threshold
cable service-flow
inactivity-timeout
show cable qos
permission
show cable qos profile
OL-1581-08
shows the descriptions for the fields displayed by the phs option for this command:
show interface cable service-flow phs Field Descriptions
Description
Service flow identification number.
Note
PHS Index. Number that uniquely references the PHS rule.
PHS Size. 8-bit value specifying the number of header bytes to be
suppressed.
PHS Verify. Indicates whether PHS verification is enabled.
PHS Mask. 5-bit PHS mask that defines the header bytes that
should be suppressed.
PHS Field. 8-bit values that defines the header bytes that should be
suppressed.
Sets the parameters for DOCSIS 1.1 cable service class.
Sets the inactivity threshold value for service flows using Unsolicited Grant
Service with Activity Detection (UGS-AD).
Sets the amount of time a dynamic service-flow can be present in the system
without any activity.
Displays the status of permissions for changing QoS tables.
Displays the QoS profiles that have been defined.
Primary service flow IDs are displayed even for offline
CMs because they are needed for modem re-registration.
Cisco Broadband Cable Command Reference Guide
show interface cable service-flow
3-233
Advertisement
Table of Contents
