Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show hccp
To display information on groups associated with cable interfaces, use the show hccp command in user
EXEC or privileged EXEC mode.
Syntax Description
brief
channel-switch
detail
group
member
mac-address classifier
channel-switch
host
modem
qosparam
service-flow sfid
classifier
sid
Command Modes
User EXEC, Privileged EXEC
Command History
Release
12.1(3a)EC
12.2(4)BC1
12.2(8)BC2
OL-1581-08
show hccp [brief | channel-switch | detail]
show hccp group [brief | detail]
show hccp group member [mac-address classifier | channel-switch | host | modem | qosparam |
service-flow sfid [classifier] | sid]
(Optional) Displays a brief summary of the groups, configuration types,
member numbers, and status for cable interfaces. You can also use this
option when displaying information for a specific group.
(Optional) Displays information about the channel-switch configuration.
(Optional) Displays a detailed summary of the groups, configuration types,
member numbers, and status for cable interfaces, as well as the CLI
commands that are being synchronized across interfaces.
(Optional) Specifies a group number to be displayed. The valid range is 1
to 255.
(Optional, when displaying information for a particular group) Specifies the
member number of the Inter-database for the specified group. The valid
range is 1 to 255.
(Optional) Displays classifier information for the specified MAC address.
(Optional) Displays channel-switch information for this particular group
and member.
(Optional) Displays host information for this particular group and member.
(Optional) Displays cable modem information for this particular group and
member.
(Optional) Displays quality of service (QoS) parameter information for this
particular group and member.
(Optional) Displays service flow and classifier information for the specified
service flow ID (SFID) for this particular group and member.
(Optional) Displays service ID (SID) information for this particular group
and member.
Modification
This command was introduced.
The detail option was added.
The current time to resync and current wait to restore values were added to
the display for the brief option.
Cisco Broadband Cable Command Reference Guide
show hccp
3-193
Advertisement
Table of Contents
