Table of Contents
Advertisement
debug cable privacy
debug cable privacy
To activate debugging of baseline privacy, use the debug cable privacy command in privileged EXEC
mode. To disable debugging output, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
11.3 XA
Usage Guidelines
This command activates debugging of the Baseline Privacy Interface (BPI) feature. When this command
is activated, the BPI handler generates a debugging message whenever the BPI state changes or a
BPI-related event occurs.
Debugging must be enabled for one or more cable interfaces, using the
Tip
before the debug cable privacy command displays any output. BPI debugging can be done only on a
per-interface basis, not on the basis of a CM's MAC address.
This command is supported only on images that support BPI or BPI+ encryption.
Note
Examples
The following is typical output from the debug cable privacy command:
02:32:08: CMTS Received AUTH REQ.
02:32:08: Created a new CM key for 0030.96f9.65d9.
02:32:08: CMTS generated AUTH_KEY.
02:32:08: Input : 70D158F106B0B75
02:32:08: Public Key:
02:32:08: 0x0000: 30 68 02 61 00 DA BA 93 3C E5 41 7C 20 2C D1 87
02:32:08: 0x0010: 3B 93 56 E1 35 7A FC 5E B7 E1 72 BA E6 A7 71 91
02:32:08: 0x0020: F4 68 CB 86 A8 18 FB A9 B4 DD 5F 21 B3 6A BE CE
02:32:08: 0x0030: 6A BE E1 32 A8 67 9A 34 E2 33 4A A4 0F 8C DB BD
02:32:08: 0x0040: D0 BB DE 54 39 05 B0 E0 F7 19 29 20 8C F9 3A 69
02:32:08: 0x0050: E4 51 C6 89 FB 8A 8E C6 01 22 02 34 C5 1F 87 F6
02:32:08: 0x0060: A3 1C 7E 67 9B 02 03 01 00 01
02:32:08: RSA public Key subject:
02:32:08: 0x0000: 30 7C 30 0D 06 09 2A 86 48 86 F7 0D 01 01 01 05
02:32:08: 0x0010: 00 03 6B 00 30 68 02 61 00 DA BA 93 3C E5 41 7C
02:32:08: 0x0020: 20 2C D1 87 3B 93 56 E1 35 7A FC 5E B7 E1 72 BA
02:32:08: 0x0030: E6 A7 71 91 F4 68 CB 86 A8 18 FB A9 B4 DD 5F 21
Cisco Broadband Cable Command Reference Guide
5-58
debug cable privacy
no debug cable privacy
Modification
This command was introduced.
Chapter 5
Cisco CMTS Debugging Commands
debug cable interface
command,
OL-1581-08
Advertisement
Table of Contents
