Table of Contents
Advertisement
debug cable tlvs
debug cable tlvs
To display the Type/Length/Value encodings (TLVs) parsed by the DOCSIS 1.1 TLV parser/encoder, use
the debug cable tlvs command in privileged EXEC mode. The no form of this command disables
debugging output.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
12.1(4)CX
12.2(4)BC1
Usage Guidelines
This command displays the TLVs for service flow encodings, classifier encodings, and PHS rules. Do
not use this command when you have a large number of active CMs on your network because it could
generate a huge amount of output to the console port.
Examples
The following example shows typical output for the debug cable tlvs command:
Router# debug cable tlvs
CMTS TLV encodings debugging is on
00:02:06: Registration request from 0003.e350.9b8d, SID 3 on Cable3/0/U0
00:02:06: TLV-Block Bytes:
00:02:06: 0x0000: 03 01 01 12 01 10 1D 01 00 16 0F 01 01 01 03 02
00:02:06: 0x0010: 00 04 09 06 03 04 0A 0A 00 02 18 07 01 02 00 01
00:02:06: 0x0020: 06 01 07 18 07 01 02 00 02 06 01 07 18 07 01 02
00:02:06: 0x0030: 00 03 06 01 01 18 07 01 02 00 04 06 01 01 19 07
00:02:06: 0x0040: 01 02 00 09 06 01 07 19 07 01 02 00 0A 06 01 01
00:02:06: 0x0050: 19 07 01 02 00 0B 06 01 01 19 07 01 02 00 0C 06
00:02:06: 0x0060: 01 01 06 10 33 E0 BA 7A DA 81 1B 9B 8E 37 F5 33
00:02:06: 0x0070: 1C 84 E7 4D 07 10 01 0C C8 DB F9 26 B7 D2 DD 0A
00:02:06: 0x0080: 00 58 1E 14 15 FD 0C 04 0A 0A 00 02 08 03 00 03
00:02:06: 0x0090: E3 05 21 02 01 01 03 01 01 04 01 01 05 01 00 06
00:02:06: 0x00A0: 01 01 07 01 00 08 01 04 09 01 00 0A 01 01 0B 01
00:02:06: 0x00B0: 08 01 01 01
00:02:06: Found Network Access TLV
00:02:06: Ntw Access Control : 1
00:02:06: Found Max CPEs TLV
00:02:06: Maximum Number Of CPEs : 16
00:02:06: Found Privacy Enable TLV
00:02:06: Privacy Enable : 0
00:02:06: Found Upstream Packet Classifier TLV
Cisco Broadband Cable Command Reference Guide
5-78
debug cable tlvs
no debug cable tlvs
Modification
This command was introduced.
This command was supported on the Cisco uBR7100 series and
Cisco uBR10012 universal broadband routers.
Chapter 5
Cisco CMTS Debugging Commands
OL-1581-08
Advertisement
Table of Contents
