Cisco SR2016T-NA Reference Manual page 875

Chapter 5 Cisco CMTS Debugging Commands
Generated tftp config file
<<contents of the configuration file appear here>>, <<length of configuration file>>
See the DOCSIS 1.1 specification (revision SP-RFIv1.1-I05-000714 and above) for a description of the
Note
fields that can appear in a DOCSIS configuration file.
Related Commands cable config-file
access-denied
channel-id
cpe max
download
frequency
option
privacy
service-class
snmp manager
timestamp
show running-config
show startup-config
OL-1581-08
Creates a DOCSIS configuration file and enters configuration file
mode.
Disables access to the network.
Specifies upstream channel ID.
Specifies the maximum number of CPE devices allowed access.
Specifies the filename and server IP address for downloading a new
software image.
Specifies the downstream frequency.
Specifies options for the configuration file that are not provided for
by the other commands.
Specifies privacy options for baseline privacy images.
Specifies service class definitions for the configuration file.
Specifies Simple Network Management Protocol (SNMP) options.
Enables time-stamp generation.
Displays the current run-time configuration, which includes any
configuration files that have been defined.
Displays the current saved configuration, which includes any
configuration files that have been defined and saved.
Cisco Broadband Cable Command Reference Guide
debug cable config-file
5-15